DN70 is a multi-file output rechargeable push-button multi-function display LED flashlight, the display shows a battery voltage stalls, the current lumen value, and a flashlight overheating down flashing tips, the battery charge display, allowing users to use the state At a glance, and configure the CREE XHP70 LED light source, through the aluminum orange reflector cup, can output uniform spot. Plus four brightness stalls, key dimming, simple operation, high brightness output up to 3800 lumens, to meet the user a variety of occasions lighting. Using a single 26650, 4500mAh rechargeable lithium-ion battery as a power source. Pocket size, precision compact design, coupled with intelligent temperature control, low voltage warning, low power protection and many other intelligent design, DN70 is your work, adventure, search, help daily use the best lighting tool!
CREE XHP70 LED, life of 50000 hours, up to 3800 lumens super bright output, the head
USB charging function
Multi-function display. Can display a variety of parameters. Configuration high-rate discharge 26650 rechargeable lithium-ion battery
High efficiency constant current circuit with constant brightness
Electronic anti-reverse design, protection circuit
Intelligent circuit temperature control function, according to the working state and external temperature automatically adjust the brightness output, to maintain the use of comfort.
Double-sided coated anti-scratch optical lens
Aluminum orange reflector cup
The body is made of high quality aerospace aluminum alloy, the surface through the wear-resistant military regulations three hard anodized
IPX-8 waterproof standard (underwater 2 meters)
1.5 m drop ability
Tail upside down function
One, into the battery
1. Turn the middle of the torch barrel counterclockwise
2. The battery is mounted in the direction of the head of the flashlight into a high-rate discharge 26650 rechargeable lithium-ion battery
3. After loading the battery, install the torch cartridge into the flashlight and tighten it. When the display will automatically display IMALENT said the battery is properly installed, you can use normally
26650 rechargeable lithium ion (Li-ion) batteries are industrial batteries, not a safe and secure civilian battery, when the battery quality is poor or improper use (short circuit, high temperature, etc.), do not use the battery without the protection of the explosion, ) May cause a burning explosion and endanger personal and property safety, if the use of such types of batteries should understand the risks and voluntarily bear the corresponding responsibility. The use of lithium-ion batteries with good appearance, excellent quality and protection circuit will reduce the risk to a certain extent.
Second, open / close
Tap the right button once, the flashlight is turned on, and if you want to turn off, press the right button for 0.3 seconds to turn off.
Third, the brightness stalls
In the flashlight open the lighting state, press the right button, you can cycle to switch 2500 lumens / 300 lumens / 20 lumens.
Four, very bright mode
Long press the left button for 2 seconds, you can enter the very bright mode, the output brightness up to 3800 lumens. In the very bright mode, any right-click to exit the bright mode.
5, the use of special stalls (storm flash / SOS / beacon)
In any case, double-click the left button, flashlight immediately activate the flash function. If you need to select more gears, just double-click the left button to press the "storm flash -SOS-beacon" order to switch.
Six, low battery tips
In the lighting state, when the battery voltage is lower than 3.1V, OLED display will be 8 times / 30s flashing battery symbol to prompt the user to replace the battery or timely charge.
Seven, intelligent temperature control dimming function
Flashlight will accumulate a lot of heat when the flashlight is working for a long time. When the flashlight temperature is as high as 50 ℃, the OLED display will flash the high temperature symbol at 8 / 30s and automatically reduce the brightness to 900 lumens. To avoid the high temperature and affect the use of comfort.
Eight, automatic memory function
Flashlight will automatically remember the current brightness stalls, open again when the memory will be the brightness of the gear to work. (Except for special function gear)
Nine, charging instructions
This product comes with smart charging function, charging, you should first USB charging cable USB port into the AC adapter (5V 1A-5V 2A) USB jack, and then the flashlight USB interface dust cap pulled up, the charging line The other end of the smaller Micro USB port into the flashlight charging socket. When charging, OLED display will display the charging process symbol, when the battery charge to 4.2V, the screen will show full of symbols, 5 seconds after the automatic closure.
If the flashlight is not used for a long time, please remove the battery to avoid leakage of the battery and damage the flashlight device. Clean the flashlight with a soft cloth every six months and lubricate the thread with silicone oil.
|Product Type||3800lm Multi-function LED Flashlight|
|Battery Model (max)||26650|
|Required Battery Count||1|
|Working Depth Underwater（m）||2m|
|Packing List||3800lm Multi-function LED Flashlight X 1|
Holster X 1
USB charging line X 1
O-rings X 1
User manual X 1
4500mAh 26650 rechargeable Li-ion battery X 1
|Total weight||230 g|
1. We accept payment by PayPal.
2. We will send the order to your PayPal address when you make payment, please make sure the PayPal address is correct.
3. Normally,orders will be sent in 1 working day when payment received. If the product has been sold out,we will get it in stock by 1--2 days.
Free shipping to the worldwide. If the order amount over $20, it will be sent as registered airmail (with tracking number).
United States, Canada, United Kingdom, France, Spain, Germany :
7-15 Working days
Australia: 5-12 working days
Italy, Brazil: 10-25 working days
Other countries: 7-20 working days
3-6 working days arrive
DHL (only for Holland):
3-5 working days arrive
If you need other shipping methods for special requirement, please contact us by sending an email to: firstname.lastname@example.org ,we will reply you within 24 hours.